QUALITY AND CERTIFICATION IN NADEZHDINSKI METALLURGICAL PLANT

PJSC NADEZHDINSKI METALLURGICAL PLANT

QUALITY AND CERTIFICATION IN PJSC NADEZHDINSKI METALLURGICAL PLANT

The products that Nadezhdinski Metallurgical Plant manufactures conform to the engineering, economical, aesthetic and other requirements of customers. We produce them in accordance with the Russian and international standards which makes them competitive in the domestic and global markets.

The products that Nadezhdinski Metallurgical Plant manufactures conform to the engineering, economical, aesthetic and other requirements of customers. We produce them in accordance with the Russian and international standards which makes them competitive in the domestic and global markets. Our metallurgical plant is permanently improving the technology and implementing the latest equipment in order to enhance product quality to satisfy the highest customer demands.

Our central analytical laboratory (CAL) and thermal metal testing laboratory (TMTL) are accredited in the laboratory (center) accreditation system.

Our TMTL has an accreditation certificate No. POOC RU.0001.517249 dated April 18, 2016. Our lab performs the following tests within the scope specified in the accreditation certificate:

  • determination of non-metallic inclusions in the steel;
  • microstructure determination;
  • оdecarburisation measurements;
  • ​оaustenitic grain size measurements;
  • macrostructure evaluation;
  • cast iron microstructure determination;
  • Brinell hardness measurements;
  • surface defect identification; defect classification.

Our CAL has an accreditation certificate No. ААС.А.00209 valid till May 28, 2019, issued by AAC Analytica (Association of Analytical Centers), which is a laboratory accreditation body and a full-fledged member and participant of the ILAC and APLAC Mutual Recognition Agreements.

Our lab performs the following tests within the scope specified in the accreditation certificate:

Mechanical tests:

  • tension testing to determine mechanical properties:
  • yield strength σт, tensile strength σв, elongation δ5, contraction ratio ψ;
  • impact bending tests at low and room temperatures;
  • Brinell and Rockwell hardness measurements;
  • hardenability tests;
  • macrostructure control;
  • in-process pipe tests;
  • surface roughness control;
  • upsetting tests.

Chemical analyses of steel, cast iron, ferroalloys, iron ore, concentrates, sinter, pellets, refractory materials and products, and oils.

The company's metrological service is accredited to perform calibration with the Russian Calibration System (certificate of accreditation No. 001004 dated June 16, 2005) and to verify measuring instruments with the Federal Accreditation Service (certificate of accreditation No. 0070 dated February 07, 2012).

The iron and steel manufactured in Nadezhdinski Metallurgical Plant are rated highly in the domestic market, the CIS countries and far abroad. Our customers are the companies that operate in the automotive industry, machine engineering, pipe & tube production in Russia and the CIS countries. We export iron and steel products to many countries around the globe. We have accumulated experience in producing our products in compliance with the following international standards: DIN (Germany), NBN (Belgium), AFNOR (France), BS (Great Britain), UNI (Italy), JIS (Japan), SS (Sweden), UNE (Spain), AISI/SAE/ASTM (USA).

On December 18-19, 2013, auditors from the Russian Maritime Register of Shipping and Det Norske Veritas inspected our production to approve us as a manufacturer of semi-finished products for manufacturing flat bulb sections in accordance with the TU 00186387-12-2013 requirements. Following this audit, Recognition Certificate for Manufacturer No. 14.50287.130 dated February 21, 2014 from the Russian Maritime Register of Shipping and Certificate No. AMM 6768 from DNV were issued.

In March 2016, the plant's Chief Executive Officer approved the Quality Policy. The quality policy establishes the principal goal of Nadezhdinski Metallurgical Plant's business and defines the strategy and tactics to achieve this goal.

On June 20-25, 2016, auditors from TÜV SÜD Czech s.r.o conducted a QMS re-certification audit to verify our compliance with the ISO/TU 16949:2009 requirements. Following this audit, the TÜV SÜD certification body issued a new international certificate No. 12 111 37479 TMS dated September 08, 2016 and valid till September 14, 2018.

On July 25-29, 2016, auditors from TMS RUS (LLC) conducted a combined audit to verify our compliance with the ISO 9001:2008, ISO 14001:2004, OHSAS 18001:2007 requirements. This audit confirmed the validity of our certificate for the management system.

In July 2016, an annual audit of manufacturing of the metal products for structural application was conducted to verify compliance with the requirements specified in EU Regulation CPR No. 305/2011. This audit confirmed the validity of our certificate of conformity of the factory production control No. 0036-CPR-M-075-2014 and our right to apply the CE marking in accordance with the EU Regulation CPR No. 305/2011.

In late December 2016, an inspector from the Russian Maritime Register of Shipping (RMRS) surveyed our company and confirmed the validity of our Manufacturer Recognition Certificate No. 16.19039.130 dated March 30, 2016.

On June 05-08, 2017, auditors from TÜV SÜD Czech s.r.o conducted a QMS surveillance audit to verify our compliance with the ISO/TU 16949:2009 requirements. The audit confirmed that the validity of our certificate for the management system.

On July 17-21, 2017, auditors from TMS RUS (LLC) conducted a combined audit to verify our compliance with the ISO 9001:2008, ISO 14001:2004, OHSAS 18001: 2007 requirements. The audit confirmed that the validity of our certificate for the management system.

In July 2017, a recertification audit of manufacturing of the metal products for structural application was conducted to verify compliance with the requirements specified in the EU Regulation CPR No.305/2011. This audit confirmed the validity of our certificate of conformity of the factory production control No. 0036-CPR-M-075-2014 and our right to apply the CE marking in accordance with the EU Regulation CPR No. 305/2011.

On November 02, 2017, due to the transition to new revisions of the ISO 9001:2015 and IATF 16949:2016 international standards, the company's director approved the new Quality Policy.

In late December 2017, an inspector from the Russian Maritime Register of Shipping (RMRS) surveyed our company and confirmed the validity of our Manufacturer Recognition Certificate No. 16.19039.130 dated March 30, 2016.

On May 21-23, 2017, our plant was audited by a DNV GL representative. Following this audit, we received Manufacturer Approval Certificate No. AMMM00000NS in accordance with the DNV GL Vessel Classification Rules and DNV GL-KP-0242 Approval Program.

On July 17-21, 2017, auditors from TMS RUS (LLC) conducted a combined audit to verify our compliance with the ISO 9001:2008, ISO 14001:2004, OHSAS 18001: 2007 requirements. The audit confirmed that the validity of our certificate for the management system.

On July 16-20, 2018, auditors from TMS RUS (LLC) conducted a combined re-certification audit to verify our compliance with the ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 requirements. Following this audit, our company will shortly receive a new QMS certificate.

Certificates of Nadezhdinski Metallurgical Plant (Serov, Russia)

Сертификат ISO 9001

ISO 9001:2008 Certificate valid till September 14, 2018, Rus

Сертификат ISO 9001

ISO 9001:2008 Certificate valid till September 14, 2018, Eng

Сертификат OHSAS 18001

OHSAS 18001:2007 Certificate valid till December 07, 2018, Rus

Сертификат OHSAS 18001

OHSAS 18001:2007 Certificate valid till December 07, 2018, Eng

Сертификат ISO/TS 16949

ISO/TS 16949:2009 Certificate valid till September 14, 2018 Rus

Сертификат ISO/TS 16949

ISO/TS 16949:2009 Certificate valid till September 14, 2018 Eng

Сертификат ISO 14001

ISO 14001:2004 Certificate valid till September 14, 2018, Rus

Сертификат ISO 14001

ISO 14001:2004 Certificate valid till September 14, 2018, Eng

Сертификат EN 10025

EN 10025:2004 Certificate valid till July 06, 2020, Rus

Сертификат EN 10025

EN 10025:2004 Certificate valid till July 06, 2020, Eng

Сертификат EN 10025

EN 10025:2004 Certificate valid till July 06, 2020, Deu

Свидетельство поставщика ТМК

Certificate of Supplier of the Pipe Metallurgical Company valid till October 01, 2019

Свидетельство. Морской регистр.

Certificate. Register of Shipping valid till December 26, 2019

Сертификат соответствия продукции DNV GL - Ships, англ. до 30.06.2021

DNV GL - Ships Approval of Manufacturer Certificate, Eng, valid till June 30, 2021

   

 

Ваша корзина пуста.

иконка калькуляторMetal Rolling Calculator
Calculations are preliminary, for more accurate calculations contact the company manager. Telephone +7 (34368) 9 85 44
иконка калькуляторRailway Tariff Calculator
Departure station
Shipping Name
Destination station
Weight (tons)
Calculations are preliminary, for more accurate calculations contact the company manager. Telephone +7 (34368) 9 85 44
иконка трубкаContact usСвязаться с нами
Name*
Telephone*
Email*
Organization name*
Your comment
Referral*
* — required fields are marked
I AGREE on the processing of my personal data. with personal data processing policy acquainted with.